Bosch SHX65T55UC - Manual (Page 13)

12
Attach strain relief (not provided) to opposite side of junction box.
Insert the bare copper or green wire (ground) from the field supply wiring
into the ground connection “ ” of the terminal block and securely tighten
the terminal block screw as shown.
Insert the white (neutral) wire to the “N” connection of the terminal block
and securely tighten the terminal block screw.
Insert the black (hot) wire to the “L” connection of the terminal block and
securely tighten the terminal block screw.
Tighten strain relief.


strain relief
(not provided)
A
9