Bosch B30IB800SP - Manual (Page 19)

19
3. Switching the appliance ON
To guarantee the accuracy of the following working steps
and thus the appearance of the overall kitchen front later
on, the appliance should now be operated.
1. Open the appliance door.
2. Press the POWER button.
3. Press the POWER butten again to shut off.
Only for appliances with a water connection:
In order to avoid the risk of damage caused by leaking
water from damage possibly caused to the water pipe
feeding the appliance, keep the shut-off valve closed.
4. Preparing the door panels
Important note:
When performing any work on the door panels, always
observe the following:
 Always screw into the best load-bearing material of
the door panel.
 Never screw into fillers, decorative strips or similar.
 Select a screw length which is always shorter than
the thickness of the door panel.
 To prevent damage, protect surfaces of the door
panels during installation.
The total weight of the door panel must not exceed the
following values:

BottomFreezer 30"
(top, 1 door) 44 Ibs/20 kg

BottomFreezer 30"
(bottom) 25 Ibs/11.5 kg
5. Loading the appliance door
When attaching the door panels, it is recommended to
load the door storage compartments in the appliance
with weights in order to ensure that the gap width is as
precise as possible.
Recommendations:

BottomFreezer 30"
(top, 1 door) 40 Ibs/18 kg
 BottomFreezer 30"
(bottom) 22 Ibs/10 kg
6. Removing the positioning aid
Unscrew the positioning aid from the appliance door.
Note:
Store the positioning aids, there will be used in an
installation step later.