Maintenance, Surface light replacement, 9 caution – Bosch HMV8052U User Manual

Page 23: Replace bulb with 30 watt appliance bulb, Replace bulb cover and mounting screw, Oven light replacement, Remove the vent grill mounting screws, Pull the vent grill away from the unit, Note

Advertising
background image

23

Maintenance

Surface light replacement

9

CAUTION

To avoid risk of personal injury or property

damange, wear gloves when replacing the light

bulbs.

1.

Unplug the microwave oven or turn off power at the

main circuit breaker.

2.

Remove the bulb cover mounting screws at both light

positions under the microwave.

3.

Replace bulb with 30 watt appliance bulb.

4.

Replace bulb cover and mounting screw.

5.

Plug the microwave back into the power supply or turn

the power back on at the main circuit breaker.

Oven light replacement

1.

To replace light bulb, first disconnect power to the

microwave oven at the circuit breaker panel or by

unplugging.

2.

Remove the vent grill mounting screws.

3.

Pull the vent grill away from the unit.

4.

Remove the screw at the front of the light cover and

carefully pull out the light cover.

5.

Open light cover located behind filter mounting by

carefully pulling up on the front edge.

6.

Remove old light bulb and replace only with equivalent

30 watt bulb available from parts distributor. Bulbs are

also available at most hardware stores or lighting

centers.

Note: DO NOT USE BULB LARGER THAN 30 WATTS.

Advertising