AYRE K-5xe - Manual (Page 7)

Main Outputs
The balanced outputs use
XLR connectors, while the
unbalanced outputs use RCA
connectors.
The Ayre K-5xe MP offers one pair of balanced
outputs and one pair of unbalanced outputs. Both
pairs of outputs may be used simultaneously.
However, please note that the level of the
unbalanced outputs will be 6 dB lower than the
balanced outputs.
AC Power
Connect the Ayre K-5xe MP to an unswitched power
source. When the unit is first connected to the AC
power, the input selector will default to “B1”, the
volume control will default to “11”, the display will
be set to “On”, and both the mute and record output
will be set to “Off”. Removing the AC power from
the unit will cause it to lose its current settings and
revert to the default settings.
Although proprietary RFI (radio-frequency
interference) filtering is built into the preamplifier,
in some situations an AC power-line filter (such as
those offered by Ayre) may provide additional
sonic benefits.
5
Volts
50/60 Hertz
10 W Max
Tape
Out
Tape
Out S2 S2 S1 S1
B2 B2 B1 B1
K-5 Stereo Preamplifier
A y r e
Boulder, Colorado USA
Right Channel Outputs Left Channel Outputs
S.N.