Apricorn EZ Bus DTS - Manual (Page 33)

www.apricorn.com 33
5. DISCONNECTING
Windows 2000, XP and Vista
1. Click on the Safely Remove Hardware icon in the system tray.
2. Follow the computer screen instructions to remove your EZ Bus DTS from
your computer.
To protect against unexpected data loss, Windows verifies that all files
on the disk are closed before allowing the USB or FireWire device to be
removed. If you receive an error message that says “The device cannot
be stopped right now . Try stopping the device again later.” Close
all programs that are using files from the drive, then repeat steps 1 and
2.
Macintosh
1. The drive will need to be dismounted. This can be done by dragging the
drive to the Trash Can.
2 Wait a few seconds. Once the LED has turned off, you can safely remove
the drive.
To protect against unexpected data loss, OS X verifies that all files on the
disk are closed before allowing the device to be removed. If you receive
an error message that says “The disk “EZ Bus DTS ” is in use and
could not be ejected”. Close all the programs that are using files from
the drive, then repeat steps 1 and 2.