ALESIS NanoVerb Stereo Amplifier - Manual (Page 33)

EFFECT Knob Settings
10
33
For Cry and Auto Wah, indicates the attack/release rate.
Indicates that the control pedal controls the parameter.
Indicates that the effect assigned to the FX1 module does not have
a direct-control parameter (for example, 12-String, Pedal Wah or
Pedal Cry) or that FX1 is off.
FX2 (Multi-Effect Module 2, Delay-Based Effects)
This module gives you a choice of delay-based effects. A delay is an echo of the
original signal that can occur at varying frequency and time.
Hall Reverb
Simulates the effect of sound waves bouncing off of the walls of a
concert hall. Higher values indicate a wetter mix.
Pedal Hall Reverb
A Hall Reverb effect whose wet/dry mix is controlled by the
control pedal.
Room Reverb
Simulates the effect of sound waves bouncing off of the walls of a
room. Higher values indicate a wetter mix.
Pedal Room Reverb
A Room Reverb effect whose wet/dry mix is controlled by the
control pedal.
Plate Reverb
Recreates the classic “plate reverb” sound achieved by using a
metal plate. Higher values indicate a wetter mix.
Pedal Plate Reverb
A Plate Reverb effect whose wet/dry mix is controlled by the
control pedal.
Reverse Reverb
Creates a backwards-playing reverb that you hear immediately
before you hear the original signal, instead of after it. Higher values
indicate a wetter mix.