Settings, Daily use, 1 child lock function – Electrolux EDC2096GDW User Manual

Page 23: 2 buzzer on/off, 3 water hardness and conductivity, 1 starting a programme without delay start

Advertising
background image

6. SETTINGS

A

D

B

C

E

A)

Tijd (Time)

touchpad

B)

Startuitstel (Delay)

touchpad

C)

Fijne was (Delicate)

touchpad

D)

Wol Belading (Wool Load)

touch-

pad

E)

Start/Pauze (Start/Pause)

touch-

pad

6.1 Child lock function

This option prevents children to play with
the appliance while a programme oper-
ates. The programme knob and the
touchpads are locked. Only the on/off
button is unlocked.

Activating the child lock option
1.
Press the on/off button to activate the

appliance.

2. Press and hold touchpads (A) and (D)

at the same time until the child lock in-
dicator comes on.
• It is possible to deactivate the child

lock option while a programme op-
erates. Press and hold the same
touchpads until the child lock indi-
cator goes off.

6.2 Buzzer on/off

To deactivate or activate the acoustic sig-
nals, press and hold for approximately 2
seconds touchpads (B) and (C) at the
same time.

6.3 Water hardness and
conductivity

Water hardness is different for different lo-
cations. Water hardness has an effect on
the water conductivity and on the con-
ductivity sensor of the appliance. If you
know, the value of the water conductivity
you can adjust the sensor in order to have
better drying results.

Adjusting the conductivity sensor
1.
Press the on/off button to activate the

appliance

2. Press and hold touchpads (A) and (B)

at the same time until one of the these
indicators comes on:

(low <300 μS/cm)

(moderate 300-600 μS/cm)

(high >600 μS/cm)

3. Press the touchpad (E) again and

again until the indicator of the correct
level comes on.

4. To confirm the adjustment, press and

hold touchpads (A) and (B) at the
same time for approximately 2 sec-
onds.

7. DAILY USE

Before you use the appliance for the
first time
1.
Clean the appliance drum with a moist

cloth.

2. Start a short programme (e.g. 30 mi-

nutes) with moist laundry.

7.1 Starting a programme
without delay start

1. Prepare the laundry and load the ap-

pliance.

2. Press the on/off button to activate the

appliance.

3. Set the correct programme and op-

tions for the type of load.

ENGLISH

23

Advertising