2 replacing the lamp, 3 closing the door, Installation – Electrolux ERT1606AOW User Manual

Page 24: 1 positioning

Advertising
background image

Problem

Possible cause

Solution

The door is not closed cor-

rectly.

Refer to "Closing the door".

The food products' temper-

ature is too high.

Let the food products tem-

perature decrease to room

temperature before storage.

Many food products are

stored at the same time.

Store less food products at

the same time.

The door has been opened

often.

Open the door only if nec-

essary.

There is no cold air circula-

tion in the appliance.

Make sure that there is cold

air circulation in the appli-

ance.

If the advice does not lead to

the desired result, call the

nearest brand-mark service.

8.2 Replacing the lamp

Disconnect the plug from the mains

socket.
1. Remove the screw from the lamp

cover.

2. Remove the lamp cover (refer to the

illustration).

3. Replace the used lamp with a new

lamp of the same power and

specifically designed for household

appliances (the maximum power is

shown on the lamp cover).

4. Install the lamp cover.

5. Tighten the screw to the lamp cover.

6. Connect the plug to the mains socket.

7. Open the door.

Make sure that the light comes on.

8.3 Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective

door gaskets. Contact the After Sales

Service.

9. INSTALLATION

WARNING!

Refer to Safety chapters.

9.1 Positioning

This appliance can be installed in a dry,

well ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Climate

class

Ambient temperature

SN

+10°C to + 32°C

www.electrolux.com

24

Advertising