2 rear spacers, 3 levelling, 4 location – Electrolux ERT1606AOW User Manual

Page 25

Advertising
background image

Climate

class

Ambient temperature

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

Some functional problems

might occur for some types

of models when operating

outside of that range. The

correct operation can only be

guaranteed within the

specified temperature range.

If you have any doubts

regarding where to install the

appliance, please turn to the

vendor, to our customer

service or to the nearest

Service Centre

9.2 Rear spacers

You can find the two spacers in the bag

with documentation.
1. Release the screw.

2. Engage the spacer below the screw.

3. Turn the spacer to the right position.

4. Tighten again the screws.

2

4

3

1

9.3 Levelling

When placing the appliance ensure that it

stands level. This can be achieved by two

adjustable feet at the bottom in front.

If you place the appliance on a stand:
1. Unscrew the foot of the door hinge.

2. Screw the spare foot, found in the bag

with the egg tray, into the cabinet.

9.4 Location

It must be possible to

disconnect the appliance

from the mains power supply;

the plug must therefore be

easily accessible after

installation.

The appliance should be installed well

away from sources of heat such as

radiators, boilers, direct sunlight etc.

Ensure that air can circulate freely around

the back of the cabinet. To ensure best

performance, if the appliance is positioned

below an overhanging wall unit, the

minimum distance between the top of the

cabinet and the wall unit must be at least

100 mm . Ideally, however, the appliance

should not be positioned below

overhanging wall units. Accurate levelling

is ensured by one or more adjustable feet

at the base of the cabinet.

100 mm

15 mm

15 mm

ENGLISH

25

Advertising