Asus Z9PR-D12 - Manual (Page 121)

ASUS Z9PR-D12 Series 5-11
Using New Configuration
When a RAID set already exists, using the New Configuration command
erases the existing RAID configuration data. If you do not want to delete the
existing RAID set, use the View/Add Configuration command to view or create
another RAID configuration.
To create a RAID set using the New Configuration option
1. From the Management Menu, select Configure > New Configuration, and
then press <Enter>.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Clear Existing Configuration And Start A New Configuration
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
2. Follow steps 2 to 9 of the previous section Using Easy Configuration.
3. Select Size from the Virtual Drive menu, and then press <Enter>.
4. Key in the desired virtual drive size, and then press <Enter>.
5. Follow steps 10 to 14 of the previous section: Using Easy Configuration to
create the RAID set.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
PORT #
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
DNLIN A00-00
DNLIN A00-01
0
1
Easy Configuration - ARRAY SELECTION MENU
Virtual Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 1 148.580GB 2 64 KB ONLINE
Virtual Drive 0
RAID = 1
Units= MB
Size = 152146MB
DWC = Off
RA = On
Accept
SPAN = NO
Enter VD Size:
Enter VD Size: 152146_
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option