Asus Z9PR-D12 - Manual (Page 130)

5-20 Chapter 5: RAID configuration
3. When prompted, use the arrow keys to select Yes from the Consistency
Check? dialog box, and then press <Enter>.
A progress bar appears on the screen.
4. While checking the disk consistency, press <Esc> to display the following
options.
• Stop - Stops the consistency check. This utility stores the checked
disk percentage, allowing you to resume checking the same
disk from the last percentage completed.
• Continue - Continues the consistency check.
• Abort - Aborts the consistency check. When you resume checking,
the process will start over from the beginning.
5. When checking is complete, press any key to continue.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Virtual Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 10 154494MB 4 64 KB ONLINE
Virtual Drives
Virtual Drive 0
Consistency Check?
Yes
No
Select VD
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
SPACE-(De)Select, F10-Check Consistency
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Virtual Drive(s) Configured
LD RAID Size #Stripes StripSz Status
0 10 154494MB 4 64 KB ONLINE
Virtual Drives
Virtual Drive 0
CC Under Process
VD 0 Consistency Check. Press Esc to Abort.
¦ 85 % Completed
The Data On The Drives Is Inconsistency. Repair Done!
LSI Software RAID Configuration Utility Ver C.05 Sep 17, 2010
BIOS Version A.10.09231523R
SPACE-(De)Select, F10-Check Consistency