Abbott Diabetes Care FreeStyle Flash Blood Glucose Monitor - Manual (Page 22)

Call Customer Care Toll Free at 1-888-522-5226 www.AbbottDiabetesCare.com
2
1
Performing a Control Solution Test
Insert only the Top end of test strip
into the meter (with the dark-colored
rectangle going into the meter).
Grasp the bottom of the test strip with
the name “FreeStyle” on the test strip
facing up.
Insert the top of the test strip into your
meter until it stops. This will power on
the meter.
The code number on the meter display
should match the code number on the
side of your test strip vial. They must
always match, or your results will be
inaccurate. (Refer to “Setting the Test
Strip Code” on pages 29 and 30.)
Wait for the meter to display the Blood
Drop and Test Strip symbols.
Note: Be ready to adjust the code on
the meter to match the code on the
test strip vial.
19
Top
Bottom
Code 27