Abbott Diabetes Care FreeStyle Flash Blood Glucose Monitor - Manual (Page 32)

Call Customer Care Toll Free at 1-888-522-5226 www.AbbottDiabetesCare.com 29
1
Before performing a blood glucose test, prepare the lancing device
(refer to pages 22 and 23 for more information).
Prepare Your Meter
a. Insert a new test strip into the meter
until it stops. The meter powers on.
Performing a Blood Glucose Test
1. System Check
Setting the Test Strip Code
When the meter powers on, three display screens appear in the
following order:
Top (for insertion into the meter)
Insert only the Top end of the
test strip into the meter (with the
dark-colored rectangle going into
the meter).
Bottom (for blood sample)
Note: If you do not start the test within two minutes, the meter
returns to clock mode. To restart your meter, take out the unused
test strip and reinsert it into the meter.