Osd operation – ATEN CS-1004 User Manual
Page 19
OSD Operation
On Screen Display (OSD), provides a menu driven interface to handle the
computer switching procedure. Using OSD is a great deal more convenient -
especially in large, daisy chained installations where it is difficult to keep track of
which port a particular computer is attached to.
All operations start from the OSD Main Menu. To pop up the Main Menu, tap
either Ctrl key twice. When you invoke the OSD, a screen similar to the one
below appears:
w
OSD always starts in List view, with the highlight bar at the same position it
was in the last time it was closed.
w
From the Main Menu, you can go directly to any port by either keying in its
Port ID (Station Number - Port Number), and pressing [Enter] or by double
clicking on it with the mouse.
Navigation
w
To dismiss the menu, and deactivate OSD, press [Esc]
w
Use the Up and Down Arrow Keys to move up or down through the list one
line at a time
w
Use [Pg Up] and [Pg Dn] to move up or down through the list one screen at a
time
w
Click on (
▲▼
) to move up or down through the list one line at a time
w
Click on (
éê
) to move up or down through the list one screen at a time
w
To activate a port, move the Highlight Bar to it then press [Enter] or Double
Click with the left mouse button.
2001-01-13
CS-1004 / CS-1008 / CS-1016 User Manual
15