LG LGLX610 - Manual (Page 38)

26 2A. Phone Basics
Dialing From the Contacts List
1. Highlight and press > Contacts .
2. Highlight the entry you want to call and press
to dial the entry’s default phone number.
– or –
To dial another number from the entry, highlight
the name and press
, and then highlight a
number and press .
Speed Dialing
You can store up to 98 numbers in your phone’s speed
dial memory. Dial speed dial entries using one
keypress for locations 2–9 or two keypresses for
locations 10–99.
To use One-Touch Dialing for speed dial locations 2–9:
ᮣ Press and hold the appropriate key for
approximately two seconds. The display confirms
that you have dialed the number when it shows
“Calling...”.
To use Two-Touch Dialing for speed dial locations 10–99:
1. Press the first digit.
2. Press and hold the second digit for approximately
two seconds. The display confirms that you have
dialed the number when it shows “Calling...”.
Plus (+) Code Dialing
When placing international calls, Plus Code Dialing
automatically enters the international access code for
your location (for example, 011 for international calls
made from the U.S.).
1. Press and hold until you see a “ + ” on the
display screen.
2. Dial the country code and phone number, and
then press
. (The phone automatically
prepends the access code for international dialing,
followed by the country code and phone number.)
Shortcut: From standby mode, press CONTACTS (right
softkey) to list entries.
Note: Speed dialing is not available when you are roaming;
when you are roaming off the Nationwide Sprint
Network, you must always dial using eleven digits
(1 + area code + number).