Accton Technology Wireless LAN 802.11b/g Device WN4201B User Manual
Page 60
Wireless LAN 802.11b/g Device
60
Figure 57: Status of Wireless AP
The Wireless AP tab is displayed when Status is selected in the Tools menu. The Wireless AP tab
shown in figure 57 shows the following:
•
Status: The SoftAP™ is enabled and running in Access Point Mode
•
SSID: The SSID has been left at default (WIRELESS-NETWORK)
•
Encryption Type: No security has been set up between the two wirelessly connected
devices
Note:
It is not recommended to connect wireless devices of any kind without establishing security
settings. See section 8.3 for instructions on how to establish either WEP or WPA security
while in AP Mode
.
•
MAC Filtering: MAC Filtering has not been established
•
Broadcast SSID: The HP PC is broadcasting the SSID (other devices are able to view this
HP PC when they search for Wireless LAN 802.11b/g Devices)
•
Number of Clients: There is one client associated (connected) to this HP PC
•
Running Time: Time Connected