LG LGD950 - Manual (Page 15)

15
Installing the micro SIM card
Before you can start exploring your new phone,
you’ll need to set it up. The micro SIM card
tray eject button is a small round aperture on
the tray door. To install a new micro SIM card:
1 Insert the micro SIM ejection tool that
comes with the phone (or a thin pin) into the
eject button aperture and push gently but
firmly until the tray pops out. Then pull the
micro SIM card tray.
Eject button aperture
2 Position the micro SIM card into the tray (as
shown in the image below).
3 Insert the micro SIM card tray.
%
NOTE
• Turn the phone off before inserting or removing
the micro SIM card.
% Warning
• Always be careful when removing the
micro SIM card tray. The ejection tool is
very sharp.
Charging your phone
1 Connect the wall adapter and USB cable as
shown below. The USB symbol on the USB
cable should face toward you.
Getting Started