LG LMX28994ST - Manual (Page 26)

26
SETTING THE FUNCTIONS
SETTING THE METERED FILL UNIT
You can change the unit of Metered fill.
As you can see the left, the
initial unit after power on is OZ.
The unit is changed to CUPS
when you press and hold this
button at least 3 seconds and
when you press it again,
changed to OZ.
While water is dispensed, the
numbers will be increase.
SETTING THE DISPENSER
You can select the ice type of the dispenser.
The default setting is CRUSHED
ice.
Press CUBE to get cubes
instead of crushed ice.
SETTING THE LIGHT
You can control the lamp in the dispenser.
The lamp is off when the power on.
When you press the LIGHT button,
the lamp turns on, the icon also on.
When you press it again, the lamp
turns off, and the icon also turns off.
SETTING THE FILTER RESET
You need to reset filter remaining period after
replacing filter.
Press and hold the FILTER RESET
button more than 3 seconds to reset
the filter indicator after the water filter
has been replaced.
The figure is changed 6 0 after
pressing it more than 3 seconds.
NOTE: It is recommended that the filter be replaced
when the indicator light on the front dispenser
reaches 0.
ACTIVATING ICE PLUS
Press the ICE PLUS button to
activate the ICE PLUS function.
The ICE PLUS function runs the
freezer compartment at the coldest
setting for 24-hour to increase ice
making and then turns off
automatically.
To deactivate this function, press it
again.