Avaya 3600 - Manual (Page 18)

Avaya, Inc. Configuration and Administration—AVAYA 3616/3620/3626 WT
Avaya CCMS IP, Avaya Call Server, with Avaya 4612 IP Telephone Emulation
21-300352, Issue 2, July 2005 Page 18
5. 3600 Series Wireless Telephones Configuration
The Wireless Telephone can be automatically configured for IP address and/or ESSID by enabling
DHCP and/or ESSID Learning, respectively.
Each Wireless Telephone may be configured for site-specific requirements by opening the Admin
menu and selecting options or entering specific information. Any settings entered in the Admin menu
must conform to system settings. Only the Wireless Telephone being configured is affected by the
Admin menu settings.
The Wireless Telephone user may select several usability options from the standby menu, described
below in the User-defined Preferences section. This information is also provided in the end user
manual.
The AVAYA Configuration Cradle is an accessory device designed to automate configuration of 3600
Series Wireless Telephones. The Configuration Cradle is connected to a PC via a serial cable. A
downloadable Configuration Cradle program runs on the PC and enables the system administrator to
establish and store configuration options for system, group and user levels. A configuration plan may
be set up in the program and downloaded into a Wireless Telephone or a configured Wireless
Telephone may be placed in the cradle and its configuration may be uploaded and edited or saved.
Please see your service representative or contact Avaya Customer Service for more information about
this time-saving device.
5.1 The Admin Menu
The Admin menu contains configuration options that are stored locally (on each Wireless Telephone).
Every Wireless Telephone is independent and if the default settings are not desired, the admin options
must be set in each Wireless Telephone requiring different settings.
Opening the Admin menu
1. With the Wireless Telephone powered OFF, simultaneously press and hold the
Power On
and
Power Off
keys.
2. Release the
Power On
key, wait for a single beep, then release the
Power Off
key. The first
option on the Admin menu displays.
 If an admin password has been set, the display will require its entry before
opening the Admin menu. If no password is set, the display will proceed
directly into the Admin menu.