Electrical connections, Warning, Cooktop installation – LG LCE3681ST User Manual

Page 27

Advertising
background image

ENGLISH

27

ELECTRICAL CONNECTIONS

(cont.)

Observe all governing codes and local
ordinances.

Disconnect the power supply.

At the circuit breaker box, fuse box or junction
box, connect appliance and power supply cable
wires as shown.

WARNING

If connecting to a 4-wire power supply cable
electrical system, the appliance frame
connected ground wire MUST NOT be
connected to the neutral wire of the 4-wire
electrical system.

IF COOKTOP IS USED IN A NEW BRANCH CIRCUIT INSTALLATION (1996 NEC), MOBILE
HOME, RECREATIONAL VEHICLE, OR WHERE LOCAL CODES DO NOT PERMIT GROUNDING
TO THE NEUTRAL (WHITE) WIRE

4-WIRE GROUNDED JUNCTION BOX

Cable from power supply

Black
wires

White wire
(no connection)

Red
wires

Junction box

UL-listed conduit
connector

Cable from cooktop

Green wire (ground)

Ground
Wire

COOKTOP INSTALLATION

Visually inspect the cooktop for damage.

Make sure all cooktop screws are tight
(see below for locations).

Carefully lower the cooktop into the counter- top
cutout, making sure not to trap any wires.

NOTE: Do not use caulking compound. The
cooktop must be removable, should service be
required.

Screws

Advertising
This manual is related to the following products: