LG AN215 - Manual (Page 36)

Information
36
Supported Monitor Display
Component-*1 RGB(DTV)-*2 HDMI(DTV)-*3 Signal
< DVD/DTV Input >
* Cable type
1- Component Cable
2- Computer Cable
3- HDMI Cable
* We recommend using 720p resolution.
NTSC(60Hz)
480i
480p
720p
1080i
PAL(50Hz)
576i
576p
720p
1080i
O
O
O
O
O
O
O
O
X
O
O
O
X
O
O
O
X
O
O
O
X
O
O
O
640X350 70.09Hz 31.468kHz
640X350 85.08Hz 37.861kHz
PC98 640X400 85.08Hz 37.861kHz
720X400 70.08Hz 31.469kHz
720X400 85.03Hz 37.927kHz
640X480 59.94Hz 31.469kHz
640X480 72.80Hz 37.861kHz
640X480 75.00Hz 37.500kHz
640X480 85.00Hz 43.269kHz
800X600 56.25Hz 35.156kHz
800X600 60.31Hz 37.879kHz
800X600 72.18Hz 48.077kHz
800X600 75.00Hz 46.875kHz
800X600 85.06Hz 53.674kHz
1024X768 60.00Hz 48.363kHz
1024X768 70.06Hz 56.476kHz
1024X768 75.02Hz 60.023kHz
1024X768 84.99Hz 68.677kHz
1152X864 60.05Hz 54.348kHz
1152X864 70.01Hz 63.995kHz
1152X864 75.00Hz 67.500kHz
1280X768 60.00Hz 47.693kHz
1280X960 60.00Hz 60.000kHz
1280X1024 60.02Hz 63.981kHz
1280X1024 75.025Hz 79.976kHz
XGA
SXGA
EGA
DOS
VGA
SVGA
* The following table lists the display formats supported by the projector.
* In case of the use of HDMI To HDMI cable, PC shall not be supported.
* If the projector does not support the input signal, “Out of range” message appears on the screen.
* The projector supports DDC1/2B type as Plug & Play function. (Auto recognition of PC monitor)
* The Synchronization input form for horizontal and vertical frequencies are Separate.
* According to PC, the optimum vertical frequency may not be displayed up to the optimum frequency of set in
‘Registration information (Display registration information)’. (ex, The optimum vertical frequency may be displayed
up to 85Hz or under in the resolution of 640X480 or 800X600.)
Sources Format Vertical Freq.(Hz) Horizontal Freq. (kHz)