LG US760 - Manual (Page 122)

120
Safety
and academia after extensive reviews
of the scientific literature related to
the biological effects of RF energy.
The exposure limit for wireless
mobile phones employs a unit of
measurement known as the Specific
Absorption Rate, or SAR. The SAR is
a measure of the rate of absorption
of RF energy by the human body
expressed in units of watts per
kilogram (W/kg). The FCC requires
wireless phones to comply with a
safety limit of 1.6 watts per kilogram
(1.6 W/kg). The FCC exposure limit
incorporates a substantial margin of
safety to give additional protection to
the public and to account for any
variations in measurements.
Tests for SAR are conducted using
standard operating positions
specified by the FCC with the phone
transmitting at its highest certified
power level in all tested frequency
bands. Although SAR is determined
at the highest certified power level,
the actual SAR level of the phone
while operating can be well below
the maximum value. Because the
phone is designed to operate at
multiple power levels to use only the
power required to reach the network,
in general, the closer you are to a
wireless base station antenna, the
lower the power output.
Before a phone model is available for
sale to the public, it must be tested
and certified to the FCC that it does
not exceed the limit established by
the government adopted
requirement for safe exposure. The
tests are performed in positions and
locations (e.g., at the ear and worn
on the body) as required by the FCC
for each model.
This device was tested for typical
body-worn operations with the back
of the phone kept 0.79 inches (2.0
cm) between the user’s body and
the back of the phone. To comply
with FCC RF exposure requirements,
a minimum separation distance of
0.79 inches (2.0 cm) must be
maintained between the user's body
and the back of the phone. Third-
party belt-clips, holsters, and similar
accessories containing metallic
components should not be used.
Body-worn accessories that cannot
maintain 0.79 inches (2.0 cm)
separation distance between the
user's body and the back of the
phone, and have not been tested for
typical body-worn operations may
not comply with FCC RF exposure
limits and should be avoided.
The FCC has granted an Equipment
Authorization for this model phone
with all reported SAR levels
evaluated as in compliance with the
FCC RF emission guidelines.
The highest SAR value for this model
phone when tested for use at the
ear is 0.58 W/kg and when worn on
the body, as described in this user’s
manual, is 0.55 W/kg. While there
may be differences between SAR
levels of various phones and at
various positions, they all meet the
government requirement for safe
exposure.
SAR information on this model