LG US760 - Manual (Page 15)

13
The Basics
Installing the Battery and microSD Card
NOTE It is important to fully charge the battery before initial use of the phone.
1. Hold the phone with both hands and use the protruding
ridges to slide open the battery cover.
2. Then use the fingertip cutout to lift the bottom edge of the
battery out.
3. Locate the microSD card slot. Position the microSD card
with the label side facing up and slide it into place until it is
fully inserted and locked in place.
NOTE The microSD card can be easily damaged by improper operation. Please be
careful when inserting, removing or handling it.
4. Align the battery contacts with the terminals near the top of
the phone, then press the battery into place.
5. Replace the battery cover over the back of the phone. Slide
the battery cover upwards until it clicks into place.