LG LGLS696 - Manual (Page 180)

171
Tools and Calendar
Pair Your Phone with Another Bluetooth Device
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap Discoverable to place a checkmark and make
your device visible. Your device must be visible to successfully pair with an external
device.
3. Tap Scan for devices. (Your device will display a list of discovered in-range Bluetooth
devices.)
4. Tap a device from the list to initiate pairing.
5. Depending on the device, you might have to tap Pair to accept the passkey (if they
match on both devices) , confirm matching passkeys, or enter the passkey or PIN Code.
6. Tap Done > OK if you entered a passkey or PIN code or passkey.
7. The external device will then have to accept the connection and enter your device‗s PIN
code.
 Once successfully paired to an external device,
appears within the Status Bar.
Note: Due to different specifications and features of other Bluetooth-compatible devices,
display and operations may be different, and functions such as transfer or exchange
may not be possible with all Bluetooth compatible devices.
Pairing between two Bluetooth devices is a one-time process. Once a pairing has been
created, the devices will continue to recognize their partnership and exchange
information without having to re-enter a passcode again.
Disconnect a Paired Device
Disconnecting a paired device breaks the connection between the device and your LS696, but
retains the pairing. At a later point when you wish to reconnect the device, there is no need to
setup the connection information again.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap the previously paired device (under the Bluetooth
devices section).
3. Tap OK to confirm disconnection.
– or –
From the Bluetooth settings page, touch and hold the name of the previously paired
device, and select Disconnect.