Charge the battery – LG LGLS696 User Manual
Page 25
Device Basics
16
Install the Battery
Remove the Battery
1.
Make sure the power is turned off so that you don‗t lose any unsaved items.
2. Lift the back cover using the fingertip cutout located at the bottom of the cover and
remove it.
3. Lift the battery using the fingertip cutout and remove it from the device.
WARNING:
Do not handle a damaged or leaking Li-Ion battery as you can be burned.
Charge the Battery
Keeping track of your battery‗s charge is important. If your battery level becomes too low, your
device automatically turns off, and you will lose any information you were just working on.
Always use a Sprint-approved or LG-approved desktop charger, travel charger, or vehicle power
adapter to charge your battery.
1. Connect the charging adapter and USB cable as shown; the LG logo on the charging
adapter should face toward you.
2. Plug one end of the USB cable into the device's Charger/Accessory Port and the other
end into an electrical outlet. The charge time varies depending upon the battery level.
With the Sprint-approved Li-Ion battery, you can recharge the battery before it becomes
completely rundown.