LG LGVS920 - Manual (Page 21)

19
The Basics
Locate the microSD card slot (microSD is inscribed near the slot opening).
Position the microSD card with the logo facing up and slide it into place until
it is fully inserted and locked in place.
NOTE The microSD card can be easily damaged by improper operation. Please be careful when
inserting, removing or handling it.
To remove the microSD card
Turn the power off. Remove the battery cover and take
the battery out. Locate the microSD card slot. Gently
pull the microSD card out to remove it.
To unmount the microSD card
It is important to unmount the card to avoid damage to the card or data
saved on the card.
1. From the Home screen, tap the Apps Key .
2. Tap Settings > Storage.
3. Tap Unmount SD card > OK.
Memory encryption
 You can encrypt all data in phone and the SD card.
 Data cannot be encrypted when the battery level is less than 80%.
 While encrypting, you cannot access other functions.
 Do not unplug your charger while encrypting.
 Do not connect the USB Cable while encoding.
 Do not take out the SD card while encoding.
 Do not take out the battery while encoding.
 Do not press the Power/Lock Key while encoding.
 While encrypting phone, your phone will reboot several times.
 After encrypting the SD card and performing a Factory reset, you
cannot access encrypted data in the SD card.
 After encrypting Phone or the SD card, you cannot use ‘None’, ‘Slide’,
‘Face Unlock’, ‘Pattern’ in ‘Select screen lock’ menu.