LG LGVS920 - Manual (Page 51)

49
Connecting to Networks and Devices
 Tap Camera (PTP) to connect with the camera and transfer photos
(transfer files when MTP is not supported).
NOTES ţ USB Autorun only works with Windows ® XP, Windows ® Vista, and Windows ® 7
operating systems.
ţ Log on to the PC as Administrator. Non-Administrator accounts have insufficient
privilege to install the USB Modem driver and don’t run the Autorun feature.
ţ Do not unplug the USB Cable during Autorun.
ţ If Autorun doesn’t function properly, unplug and plug the USB Cable to set Mass
storage mode.
Autorun automatically installs the USB device driver for every USB mode.
Internet connection mode
Autorun may automatically use Internet connection mode in certain
circumstances.
 Autorun automatically switches to Internet connection mode if the
connection fails while syncing or connecting.
You can share your phone’s internet connection with your PC using a USB
cable. After connecting with a USB cable, set the USB connection mode to
Internet connection. Then select between Ethernet and Modem.
 Ethernet: This mode changes the phone to USB tethering mode from
the PC. From the Home screen, tap the Apps Key > Settings >
More... (under WIRELESS & NETWORKS) > USB tethering > Mobile
Broadband Connect to enable USB tethering mode.
NOTE This mode can only be used if you are subscribed to a data tethering plan with your
wireless service provider.
 Modem: This mode changes the phone to Modem mode from the PC.
Ask for USB connection
You can choose to be asked to confirm the USB connection when
connecting to a computer.
When Ask on connection is checkmarked, the USB selection window is
displayed.