LG PG65U - Manual (Page 27)

27 USING THE PROJECTOR
Watching the Projector
Turning on the Projector
1
Connect the power cord correctly.
2
After waiting for a moment, press
the POWER button on the remote
control or the control panel.
(The light on the control panel will be
turned on.)
3
In the Language Selection screen,
select a language.
4
Select an input signal by using the
INPUT button on the remote control.
Focus and Position of the
Screen Image
When an image appears on the screen,
check if it is in focus and fits the screen
properly.
HDMI/DVI
RGB IN
A/V IN
ANTENNA IN
Focus ring
y To adjust the focus of the image,
rotate the focus ring.
y To adjust the focus ring, be careful
not to touch the keys on the control
panel.
Watching the Projector
1
In Standby mode, press the POWER
button to turn the projector on.
2
Press the INPUT button and select
the input signal you want.
3
Control the projector using the fol-
lowing buttons while watching projec-
tor.
Button Description
CH ︿, ﹀
Scrolls through saved
channels.
LIST
Selects a channel on the
saved or recent watched
channel list.
0 - 9
Selects a channel by
entering numbers.
VOL -, + Adjusts the volume level.
MUTE Mutes all sounds.
Q.MENU Accesses the quick menu.
FLASHBK
Alternates between
the last two channels
selected.
4
To turn the projector off, press the
POWER button.