LG PG65U - Manual (Page 7)

7 SAFETY INSTRUCTIONS
y Always use batteries approved and
certified by LG Electronics.
- Otherwise, this may result in fire or
explosion.
y Store the battery away from metallic
objects, such as keys and paper clips.
y Excess current may cause a rapid
increase in temperature, resulting in
fire or burns.
y Do not store the battery near any
heat source, such as a heater.
- This may result in fire or damage
the product.
y Do not store it at temperatures higher
than 60 ° C or in high humidity.
y Keep the battery out of reach of
children.
- This may result in personal injury or
damage to the product.
y Make sure that the battery is installed
correctly.
y Incorrect battery replacement may
cause fire.
y Do not stare directly into lens when in
operation, eye damage can occure.
y No user serviceable parts inside unit.
High voltage parts can cause shock
and even electrocution.
y Proper ventilation required, do not
block airflow around unit.
Doing so can cause injury and inter-
nal overheating.
y To prevent damage to lamp, unit
must remain plugged in for approxi-
mately 3 minutes after power down
to allow for proper cool down (not
applicable on LED models).
y Do not touch the lens; doing so can
result in burns or damage to lens.
Lens and unit may be HOT during
and immediately after use.
Use caution when handling unit, al-
lowing for proper cool down.
y Only use a grounded electrical outlet.
y Do not insert anything into or cover
up the exhaust vents.
y Follow all maintenance guidelines for
optimal use; service only at an autho-
rized service center.
y Lamp contains mercury and as such
must be disposed of according to
local, state and federal laws
(not applicable on LED models).
CAUTION
y Unplug the power cord if the projec-
tor is not used for a long period.
- Accumulated dust may cause
overheating, an electric shock from
corroded insulation, or a fire from an
electrical surge.
y Only use the specified type of battery.
- Otherwise, this may cause an elec-
tric shock caused by overheating
and leakage.
y Make sure you use the same type of
battery when replacing.
(Battery CR2032/3V)
- In the case of a battery contact
failure, the battery may drain quickly
or the remote control may not work
properly.