Supported mibs – Agilent Technologies J3972A User Manual
Page 27
Introduction
Probe Overview
7
Supported MIBs
The ATMProbe uses SNMP, MIB-II, Agilent private MIB extensions, and
selected RMON MIB groups (groups 3,7,8, and 9) to provide the following
features:
z
Alarms
z
Filters
z
Packet Capture
z
Events
z
Log
z
Trap
z
PVC configuration
z
SVC configuration
z
Signaling Layer Statistics
z
Signaling Layer Historical Statistics
z
AAL-5 Protocol Statistics
z
AAL-5 Historical Protocol Statistics
z
Per PVC AAL-5 Protocol Statistics
z
Per PVC AAL-5 Historical Protocol Statistics
z
SVC Aggregate AAL-5 Protocol Statistics
z
SVC Aggregate AAL-5 Historical Protocol Statistics
* PPP refers to PPP, HDLC, or SDLC.
The ATMProbe implements groups 3, 7, 8, and 9 of RFC 1757, the Remote
Network Monitoring Management Information Base (RMON-1 MIB). Refer to
the RFC for more information.
The ATMProbe also implements the Agilent Private MIB, which contains all
ATM statistics and allows for configuration and administration of the probe. It
provides enhanced authentication features, specification of trap destinations,
remote download of new firmware revisions, serial line control, and other
features. The Agilent Private MIB is available electronically with NetMetrix.