Agilent Technologies J3972A - Manual (Page 43)

Local Terminal Configuration
Using a Local Terminal
23
Date Press 2 and enter the day of the week and then the date in
month/day/year format (mm/dd/yy, through 1999 or
mm/dd/yyyy, starting 2000).
Time Press 3 and enter the time of day in hours, minutes, seconds
(hh:mm:ss) format.
Time Zone Press 4 and enter your time zone in one to 15 characters
(optional).
The Time Zone characters are stored for your convenience
and are used to time-stamp probe information.
Recommended practice is to use the format of Time Zone,
hours from Greenwich mean time, and then Daylight Saving
Time, such as PST8PDT for Pacific Standard Time (the
default). The probe does not automatically update the Time
field when your local time changes from standard time to
daylight savings and back.
The values you enter for date and time take effect as soon as you enter them.
All other parameters do not take effect until you select the Save Changes
and Exit menu item.
3. Press S to save the configuration changes and return to the probe’s Main
Menu. If you want to cancel your current changes and return to the probe’s
Main Menu, press
0 .
NOTE The other Main Menu items are explained in other chapters of this manual. The
TFTP Download new firmware and XMODEM Download new firmware
menu item is described in Chapter 6 “Download New Firmware”. The Warm
start and Exit and Cold start and Exit menu items are explained in Chapter 5
“Probe Operation”.