LG LX400 - Manual (Page 51)

Section 2B. Nextel Direct Connect 37
2. Accept the incoming call. If available, the caller’s
name and Direct Connect number also appear on
the display.
3. When the caller has finished speaking, a tone
sounds and “
Open ” appears on the display.
4. Press and hold the Direct Connect button and wait
for a tone to sound and a message (“
Me ”) to appear
onscreen. Continue the Direct Connect call as
described previously.
Ending a Direct Connect Call
ᮣ Press .
Tip Quieting incoming calls and increasing your
privacy.
When you are in an area where incoming
Direct Connect calls may disturb others, or if you
wish to increase the privacy of your calls, please set
your speakerphone to Off and your ringer to vibrate.
When the speakerphone is off, Direct Connect calls
use the phone’s earpiece and microphone, while
still utilizing the Direct Connect button. You may
also use an earbud or other hands-free device for
increased convenience.
Tip Press END to dismiss an incoming Direct Connect
call.
Direct Connect
LX400_Eng_0603.qxp 6/3/09 10:51 AM Page 37