LG LX400 - Manual (Page 56)

42 Section 2B. Nextel Direct Connect
Making a Group Connect Call From Contacts
1. Press Contacts (right softkey).
2. Select a Group and press the Direct Connect button
to begin the Group Connect call.
3. Continue the Group Connect call in the same
manner as a one-to-one Direct Connect call.
4. When you are finished, press to end the call.
(By default, when you end a Group Connect call
that you initiated, all other participants are dropped
from the call. To change this option, see “Setting
Group Termination Options” on page 43.)
Making a Group Connect Call From History
1. Press > History .
2. Select a Group Connect call entry and press the
Direct Connect button.
3. Continue the Group Connect call as described
previously.
Note If you get an error message saying that your contact
“is not reachable via Direct Connect”or “this
number is not DC capable,”please check to see
that you have highlighted a valid Direct Connect
number.
Currently Sprint phones do not support Group
Connect calls with Nextel and PowerSource
phones. This enhancement is planned for later 2008.
If your calls are not going through, please check to
see if your contact is using a Sprint phone.
Note Only one person at a time may speak on any Direct
Connect or Group Connect Call.
LX400_Eng_0603.qxp 6/3/09 10:51 AM Page 42