AudioCodes MEDIAPACK VERSION 6.2 - Manual (Page 29)

Version 6.2 29 December 2010
SIP Release Notes 1. What's New in Release 6.2
Notes:
• The Hotline duration can be set for all ports using the existing, “global” parameter,
HotLineToneDuration.
• This feature is applicable only to FXS and FXO interfaces.
5. Distinctive Ringing per FXS Based on Destination Number:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI SNMP EMS CLI
This feature supports distinctive ringing patterns and call waiting tones based on
destination (called) number (or prefix) for IP-to-Tel calls (FXS interfaces). This is in
addition to the existing support based on calling number. For example, if multiple
destination numbers are used to route incoming SIP INVITE requests to a specific FXS
port, a different ringing pattern can be configured per destination number. This feature
is configured using the existing ToneIndex parameter.
6. Channel Select Mode for Ringing Hunt Group:
Product
MP-11x MP-124
Mediant 600 Mediant 1000
Mediant 800 MSBG Mediant 1000 MSBG
Mediant 2000
Mediant 3000/TP-6310 Mediant 3000 HA/TP-6310
Mediant 3000/TP-8410 Mediant 3000 HA/TP-8410
Management Protocol
Web INI SNMP EMS CLI
This feature offers a new channel select method–Ring to Hunt Group (9)–for allocating
IP-to-Tel calls to FXS ports (channels) pertaining to a specific Hunt Group. This
method routes calls to all the FXS ports pertaining to the Hunt Group. Therefore, when
an IP-to-Tel call is received by the device for a specific Hunt Group, all telephones
connected to the FXS ports belonging to the Hunt Group start ringing. The call is
received by whichever telephone answers the call first (after which the other phones
stop ringing).
The new Ring to Hunt Group channel select option is supported by the “global”
ChannelSelectMode parameter as well as by the ChannelSelectMode parameter for
the Trunk Group Settings table (TrunkGroupSettings parameter).