AudioCodes MEDIAPACK VERSION 6.2 - Manual (Page 12)

SIP Release Notes 12 Document #: LTRT-26901
CPE SIP Products
1.1.2 Existing Hardware Platforms
This section describes existing hardware platforms from the previous release that are also
supported in Release 6.2.
1.1.2.1 MediaPack 1xx
This release supports the following existing hardware platforms:
MP-11x combined FXS/FXO devices:
• MP-114/FXS+FXO providing 2 FXS ports and 2 FXO ports
• MP-118/FXS+FXO providing 4 FXS ports and 4 FXO ports
MP-11x/FXO devices:
• MP-118/FXO providing 8 analog FXO interfaces
• MP-114/FXO providing 4 analog FXO interfaces
MP-11x/FXS devices:
• MP-118/FXS providing 8 analog FXS interfaces
• MP-114/FXS providing 4 analog FXS interfaces
• MP-112/FXS providing 2 analog FXS interfaces
MP-124/FXS providing 24 analog FXS interfaces
MP-124 with AC Power
MP-124 with DC power
1.1.2.2 Mediant 600
This release supports the following existing hardware platforms:
Up to 2 FXS modules (up to 8 FXS interfaces - RJ-11 ports)
Up to 2 FXO modules (up to 8 FXO interfaces - RJ-11 ports)
Up to 2 Digital TRUNKS modules (1 or 2 E1/T1/J1 PRI spans, including fractional
E1/T1 - RJ-48c ports)
Up to 2 BRI modules (4 to 8 ISDN Basic Rate Interfaces - RJ-45 ports, 4 ports per
module)
These interfaces are available in one of the following configurations:
1 x E1/T1 port (also Fractional E1/T1)
2 x E1/T1 ports
4 x BRI ports (supporting up to 8 voice calls)
8 x BRI ports (supporting up to 16 voice calls)
4 x BRI ports and 1 x E1/T1 port
4 x BRI ports and 4 x FXS ports
4 x BRI ports and 4 x FXO ports
4 x FXS ports and 1 x E1/T1 port
4 x FXO ports and 1 x E1/T1 port