LG BD430 - Manual (Page 49)

49
√ Note:
The POWER button is enable even the "Projector" or "Remote control" of Key lock and PIN code lock
are set.
Option
PIN code lock
This function prevents the projector from being operated by unauthorized persons and provides the
following setting options for security.
Off ............Unlocked.
On ........... Enter the PIN code every time turning on the projector.
Whenever you change the PIN code lock setting or the PIN code (the three-digit number), you are
required to enter the PIN code. The “111” is set as the initial PIN code at the factory.
If you want to change the PIN code lock setting, Press OK button and the PIN code dialog box appears.
Enter a PIN code
Use the Point ▲▼ buttons to enter a number. Press the Point ► button to fix the number and move the
red frame pointer to the next box. The number changes to “*”. If you fixed an incorrect number, use the
Point ◄ button to move the pointer to the number you want to correct, and then enter the correct number.
Repeat this step to complete entering a three-digit number.
After entering the three-digit number, move the pointer to “Set.” Press OK button so that you can start to
operate the projector.
If you entered an incorrect PIN code, PIN code and the number (***) will turn red for a moment. Enter the
correct PIN code all over again.
PIN code change
The PIN code can be changed to your desired three-digit number. Press ▲▼ button to select PIN code
change. Pin code dialog box appears, use the Point ▲▼ buttons to enter the correct code. The New PIN
code input dialog box appears. Set a new PIN code.
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE,
WRITE DOWN THE NEW PIN CODE IN COLUMN
OF THE PIN CODE NO. MEMO ON PAGE 64, AND
KEEP IT SECURELY. IF YOU FORGET YOUR PIN
CODE, THE PROJECTOR CAN NO LONGER BE
STARTED.