Turning on the projector, Turning off the projector, Turning on the projector turning off the projector – LG DX535 User Manual
Page 15
Installing and Composition
15
* Do not disconnect the power cord during the suction/discharge fan in operation. If the power cord is disconnected during the
suction/ discharge fan in operation, it may takes longer to activate the lamp after turning on the power and the lifespan of the
lamp may be shortened.
Turning on the Projector
Turning off the Projector
1. Connect power cord correctly.
2. Remove the lens cap. If it is left on, it could become deformed due to the heat produced by
the projection lamp.
3. Press the POWER button on the remote control or top cover.
(Green operation indicator flashes if lamp is in start-up cycle.)
●
An image will appear after the operation indicator light turns (Green).
●
Select the source mode with the SOURCE button.
1. Press the POWER button on the top cover or remote control.
2. Press the POWER button on the top cover or remote control again to turn off the power.
3. If the operation indicator LED is orange and blinking, do not disconnect(2 min.) the supply until the
operation indicator LED is lit constantly (orange).
●
If the operation indicator LED is orange and blinking, the power button on the top cover or on the remote control will not
operate.
Power off?
Please press Power key again.