LG DX535 - Manual (Page 18)

Connection
18
Connecting to a DVD
< How to connect >
a. Connect the DVD Component cable to the RCA to D-Sub
Adaptor and then connect the RCA to D-Sub Adaptor to
RGB IN of the projector.
* When connecting the component cable, match the jack colors
with the component cable.(Y=green, P B =blue, P R =red)
b. Only when the DVD device has the DVI terminal, the DVI
mode can be set.
P R P B Y (R) AUDIO (L)
* The output jacks (Y, P B , P R ) of the DVD might be labelled as Y, Pb, Pr / Y, B-Y, R-Y / Y, Cb, Cr according to the equipment.
<DVD>
Component cable
DVI-D Cable
Connecting to a D-TV Set-Top Box
< How to connect an RGB source >
a. Connect Computer cable to RGB IN of the projector.
b. Use a DTV receiver with DTV 480p(576p)/720p/1080i mode.
< How to connect a DVI source >
a. Connect the DVI terminal of the projector to the DVI output
terminal of the D-TV Set-Top Box via DVI-D cable.
b. Use a DTV receiver with DTV 480p(576p)/720p/1080i mode.
(R) AUDIO (L) DTV OUTPUT DVI OUTPUT P R P B Y HDMI OUTPUT
* To receive D-TV programmes, it is necessary to purchase a D-TV receiver (Set-Top Box) and
connect it to the projector.
* Please refer to the owner's manual of the D-TV Set-Top Box for the connection between projector and
D-TV Set-Top Box.
<D-TV Set-Top Box>
Component cable
< How to connect a Component source >
a. Connect the D-TV Set-Top Box Component cable to the
RCA to D-Sub Adaptor and then connect the RCA to D-
Sub Adaptor to RGB IN of the projector.
* When connecting the component cable, match the jack colors
with the component cable.(Y=green, P B =blue, P R =red)
(R) AUDIO (L) DTV OUTPUT DVI OUTPUT P R P B Y HDMI OUTPUT
Signal
480i
480p
720p
1080i
576i
576p
Component
O
O
O
O
O
O
RGB/DTV
X
O
O
O
X
O
HDMI/DVI
X
O
O
O
X
O
<D-TV Set-Top Box>
<D-TV Set-Top Box>
Computer Cable
RCA to D-Sub adaptor
RCA to D-Sub adaptor