LG LGVX7100 - Manual (Page 22)

Charging with USB
You can use your computer to
charge your phone. Connect one
end of the USB cable to the
charging accessory port on your
phone and the other end to a high-
power USB port on your PC.
NOTE Low power USB port is not
supported, such as the USB port
on your keyboard or bus-powered
USB hub. USB driver should be
installed before charging with
USB.
Battery Temperature Protection
Though extremely rare, should the
battery ever become overheated,
the phone will automatically turn
off. When you turn the phone back
on, a message pops up alerting you
that the phone was powered off for
your safety.
Battery Charge Level
You can find the battery charge
level
at the top right of the
LCD screen. When the charge level
becomes low, the battery sensor
sounds a warning tone, blinks the
battery icon, and displays a
warning message. As the charge
level approaches empty, the phone
automatically switches off without
saving.
Signal Strength
Call quality depends on the signal
strength in your area. You can tell
how much signal strength you have
by the number of bars next to the
signal strength icon:
the
more bars, the stronger the signal.
If you’re having problems with
signal quality, move to an open area
or, when inside a building, try
moving near a window.
Turning the Phone On and Off
Turning the Phone On
1. Install a charged battery or
connect the phone to an external
power source.
2. Press (located above the
key on the keypad) until
the LCD screen lights up.
Getting Started with Your Phone
20
VX7100_Eng_0410.qxd 3/4/10 3:20 PM Page 20