LG LGVX7100 - Manual (Page 87)

Connecting TTY Equipment and a
Terminal
1. Connect a TTY cable to TTY
connection on the terminal (TTY
connection location is the same
as a headset jack).
2. Enter the phone menu and set
the desired TTY mode.
3. After setting a TTY mode, check
the LCD screen of the phone for
the TTY icon.
4. Connect the TTY equipment to
the power source and turn it on.
5. Make a phone connection to the
desired number.
6. When connection is made, use
the TTY equipment to type in and
send a text message or send
voice.
7. The voice or text message from
the receiver end displays on the
TTY equipment display.
8.4 One Touch Dial
Allows you to initiate a speed dial
call by pressing and holding the
speed dial digit. If set to Off, Speed
Dial numbers designated in your
Contacts will not function.
1. With the Keyguard unlocked,
press [MENU].
2. Press Settings & Tools.
3. Press Call Settings.
4. Press One Touch Dial.
5. Use the Directional Key to
highlight a setting, then press
[OK].
On/ Off
8.5 Voice Privacy
Allows you to set additional voice
privacy for CDMA calls. By default,
CDMA already offers inherent voice
privacy. Check with your service
provider for availability.
1. With the Keyguard unlocked,
press [MENU].
2. Press Settings & Tools.
3. Press Call Settings.
4. Press Voice Privacy.
5. Use the Directional Key to
highlight a setting, then press
[OK].
On/ Off
85
VX7100_Eng_0410.qxd 3/4/10 3:21 PM Page 85