APC Network Management Card none - Manual (Page 30)

Network Management Card User’s Guide 23
System Menu
Option Settings
User Manager Use this option to define the access values shared by the Control
Console and the Web Interface.
Identification Use this option to define the System Name , Location , and Contact
values used by the Management Card’s SNMP agent. The option’s
settings provide the values used for the MIB-II
sysName , sysContact ,
and sysLocation Object Identifications ( OIDs ).
Note: For more information about the MIB-II OIDs, see the
PowerNet® SNMP Management Information Base (MIB)
Reference Guide provided on the APC Network Management
Card utility CD (./doc/mibguide.pdf).
&RQWLQXHG RQ QH[W SDJH
6HWWLQJ 'HILQLWLRQ
Auto Logout
Defines how much inactivity can occur, measured in minutes
(
3 , by default), before a user is automatically logged out.
Authentication
(Control Console
only) Only one setting, Basic , is available. The Basic setting causes
the Web Interface to use standard HTTP 1.1 login (base 64 -
encoded passwords).
Administrator and Device Manager User
User Name
Defines the case-sensitive name (maximum of 10 characters)
used to log in at the Control Console or Web Interface (
apc , by
default, for Administrator , and device, by default, for Device
Manager User ).
Password
Defines the case-sensitive password (maximum of 10
characters) used to log in at the Control Console or Web
Interface (
apc is the default for both Password settings).
Authentication
Phrase
Not used at this time.