Output power status, 2xwsxw 3rzhu 6wdwxv, Device manager menus – APC Network Management Card none User Manual

Page 36: Ups status frqwlqxhg

Advertising
background image

Network Management Card User’s Guide

29

Device Manager Menus

UPS Status

FRQWLQXHG

Output Power
Status

The following table uses footnotes to indicate which output-power fields
are shared by which

UPS

models (only the status field,

Output Voltage

,

is shared by all UPS models).

Note:

A 3-phase UPS (Silcon 3 Phase or Silcon DP300E series UPS)
identifies the values for all three phases.

&RQWLQXHG RQ QH[W SDJH

6WDWXV )LHOG

'HILQLWLRQ

Load Current

1

Identifies the current, in Amps, supplied by the output voltage.

Load Power

2

Identifies the UPS load as a percentage of available Watts.

Output Current

3

Identifies the current, in Amps, supplied by the output voltage.

Output Frequency

4

Identifies the frequency, in Hz, used by the output voltage.

Note:

In the Control Console for Smart-UPS or Matrix-UPS,
the

Operating Frequency

field reports the frequency

value shared by the input and output voltages.

Output kVA

5

or

Output Power

6

Identifies the load placed on each phase by the attached
equipment, in total kVA.

Output Power
Percentage

6

Identifies the load placed on each phase by the attached
equipment, expressed as a percentage of the available kVA.

Output VA at n+0

7

Identifies the load placed on each phase by the attached
equipment, expressed as a percentage of the VA available

with

no redundancy

.

Output VA at n+1

7

Identifies the load placed on each phase by the attached
equipment, expressed as a percentage of the VA available

with

the identified redundancy

.

Output Voltage

Identifies the AC voltage the

UPS

is providing to its load.

Output Watts at
n+0

7

Identifies the load placed on each phase by the attached
equipment, expressed as a percentage of the Watts available
with no redundancy.

Output Watts at
n+1

7

Identifies the load placed on each phase by the attached
equipment, expressed as a percentage of the Watts available

with the identified redundancy

.

Peak Output
Current

8

Identifies the highest current, in Amps, output by each phase.

1

Matrix-UPS

2

Smart-UPS or Matrix-UPS

3

Symmetra, Symmetra 3 Phase, or Silcon DP300E series UPS

4

Smart-UPS, Matrix-UPS, or Symmetra UPS

5

Symmetra 3 Phase UPS

6

Silcon DP300E series UPS

7

Symmetra or Symmetra 3 Phase UPS

8

Symmetra 3 Phase or Silcon DP300E series UPS

Advertising