LG LSDF995ST - Manual (Page 8)

EXTRA RINSE( ), SANITARY( )
8
PA RT S A N D F E AT U R E S
CONTROL PANEL
1
2
1
2
CYCLES
Press the cycle that corresponds to your desired wash
cycle.
POWER SCRUB
This cycle is for very heavily soiled dishes.
NORMAL
This cycle is for normally soiled, everyday loads.
DUAL INTENSITY
This cycle washes the upper and lower racks at different
spray intensities. The default setting for this cycle washes
the lower rack with strong spray intensity and the upper
rack with soft spray intensity. This provides optimum
cleaning performance for mixed loads, including fine
china and stemware. If other combinations are desired,
use the steps listed below to change the intensities or to
use the HALF LOAD feature.
How To Use Dual Intensity
1. Press and hold the SPRAY button for three seconds until
the UPPER light begins to blink.
2. While the UPPER light is blinking, press the SPRAY
button until the desired intensity for the upper rack is
selected.
3. Press the HALF LOAD button to switch to the lower rack
and use the SPRAY button to adjust to the desired
intensity.
4. Selections can be cancelled by selecting any cycle except
DUAL INTENSITY.
QUICK WASH
This is a shortened cycle that is perfect for recently used
or lightly soiled loads.
STEAM DELICATE
This cycle adds the gentle power of steam to boost the
cleaning power of the delicate cycle. The cycle is perfect
for effectively cleaning delicate items like fine china or
stemware.
STEAM FRESH
This cycle can be used to freshen up dishes that may
have been stored or not used for a long time.
CHIME ON/OFF
To enable or disable the chime, press and hold the
Quick Wash and Steam Delicate buttons for 2
seconds.
RINSE ONLY
This cycle is a quick rinse for dishes that will not be
washed immediately. No detergent should be used.
To select the Rinse Only cycle, press the Power
button; then press the Rinse button once without
pressing any other cycle buttons.
NOTE: If a main cycle has been selected, the Rinse
Only cycle will not be available without first shutting
the power off.
CANCEL
To cancel a running cycle, open the door and then
press and hold the Dual Intensity and Quick Wash
buttons together for 3 seconds. The drain pump
will be activated and the cycle will be cancelled.
CYCLE OPTIONS AND DISPLAY
Press the desired cycle option buttons to select
and set any of the dishwasher’s options described
below. The display will show the selected cycle
times and cycle options.
SPRAY (INTENSITY)
Repeated pressing of the Spray button will select
the desired spray. The strong, medium, or soft light
will show in the top left portion of the display.
RINSE
Repeated pressing of the Rinse button will select the
desired Rinse option. The Sanitary, Extra Rinse, or
Sanitary and Extra Rinse lights will show in the
bottom left portion of the display.
3
Soft ( ), Medium ( ), Strong ( )