LG AN-MR200 - Manual (Page 3)

3
RF SPECIFICATION
The Magic Motion Remote Control
communicates with RF Dongle using a
2.4 GHz bandwidth radio frequency (RF).
ꔛ
Output: 1 dBm or lower
ꔛ
Maximum Communication Distance:
10 m (32.8 ft) in an open space
ꔛ
Bandwidth: 2.4 GHz
(2.4035 GHz - 2.4783 GHz)
ꔛ Transfer Rate: 250 kbps
RF DONGLE
Use LED LCD TV/LCD TV Only.
PDP Model (50/60PZ95/75/57**) don’t need this
device. PDP TV is built in.
Cable IN
Lamp
*Attach the RF Dongle aligning with the upper left
corner bracket.
2 Connect the RF Dongle Cable plug on the RF
Dongle to a USB1 jack on the TV.
3 Attach the RF Dongle to the velcro as shown
below and then turn on the TV.
*If the RF Dongle for the wireless media box is
attached, attach the RF Dongle for the Magic
Motion remote control on the below right of the
back of the TV.
*To avoid wireless interference, keep the distance
between the RF Dongle and the Wi-Fi dongle at
20 cm.
INSTALLING RF DONGLE
Image shown may differ from your TV.
1 Locate the designated Velcro attachment
location on the TV. Then tear off the
protection paper and attach the Velcro. (The
attachment location is different depending
on the TV model you own)
20cm
86%
or
Velcro