Precautions to take, Registering, How to use – LG AN-MR200 User Manual

Page 4

Advertising
background image

4

PRECAUTIONS TO TAKE

Use the remote control within the

maximum communication distance (10 m,

32.8 ft). Using the remote control beyond

this distance, or with an object

obstructing it, may cause a

communication failure.

A communication failure may occur due to

nearby devices. Electrical devices such as

a microwave oven or wireless LAN

product may cause interference, as this

will use the same bandwidth (2.4 GHz) as

the Magic Motion Remote Control.

The Magic Motion Remote Control may

be damaged or may malfunction if it is

dropped or receives a heavy impact.

When playing a game using the Magic

Motion Remote Control, hold it securely

by wrapping its strap around your wrist

and adjusting the length with the

adjustable ring.

Take care not to bump into nearby

furniture or other people when using the

Magic Motion Remote Control.

It is recommended that your wireless

access point be located more than 1 m

(3.28 ft) away from the TV. If the AP is

installed closer than 1 m, the magic

motion remote control may not perform

as expected due to frequency

interference.

REGISTERING

The Magic Motion Remote Control
operates by pairing with your TV.

How to register the Magic Motion
Remote Control
To register the remote control,
press the

ENTER (or OK) button

on the remote control while
aiming it at your TV.

How to Re-register the Magic
Motion Remote Control after
Registration Failure
Reset the remote control by
pressing and holding both the
ENTER (or OK) and MUTE
buttons for 5 seconds. (Once the
reset is complete, the light on
the Pointer blinks.) Then repeat
the above procedure to register
the remote control.

OK

OK

OK

MUTE

ENTER

ENTER

ENTER

You can move the pointer by
aiming the front of the remote
control at your TV then move it
left, right, up or down.
If the pointer does not work
properly after clicking the

ENTER

(or

OK) button, wait for 10

seconds then use it again.

Press

ENTER (or OK) button if

there is no pointer on your TV
screen. The pointer will appear
on the screen.
If the pointer has not been used
for a certain period of time, it will
disappear.

HOW TO USE

Advertising