LG 34UM95-P - Manual (Page 13)

ENGLISH
13 asseMblInG anD PRePaRInG
Vesa (a x b) 100 x 100
stand screw M4
Required screws 4
Wall Mount Plate
(optional)
RW120
y VESA (A x B)
A
B
y Unplug the power cord before moving or install-
ing the monitor to avoid electric shock.
y Installing the monitor on the ceiling or on a
slanted wall may result in the monitor falling off,
which could lead to injury. Use an authorized LG
wall mount and contact the local dealer or quali-
fied personnel.
y Applying excessive force when tightening
screws may cause damage to the monitor. Dam-
age caused in this way will not be covered by
the product warranty.
y Use the wall mounting bracket and screws that
conform to VESA standards. Damage caused by
the use or misuse of inappropriate components
will not be covered by the product warranty.
y To prevent injury, this apparatus must be
securely attached to the wall in accordance
with the instrallation instructions. (This only
pertains to Australia and New Zealand.)
y When measured from the back of the monitor,
the length of each installed screw must be 8 mm
or less.
Wall Mount Plate
Back of the Monitor
Screw
Dimensions
: M4 x L10
Wall Mount Plate
Back of the Monitor
Max 8 mm
CaUTIon
y Use the screws specified by VESA standards.
y The wall mount kit includes the installation guide
and all necessary parts.
y The wall mounting bracket is optional. You can
obtain optional accessories from your local dealer.
y The length of the screw may differ for each wall
mounting bracket. Be sure to use the proper
length.
y For more information, please refer to the user
manual for the wall mounting bracket.
noTe