LG 34UM95-P - Manual (Page 29)

ENGLISH
29 UseR seTTInGs
settings
1 To view the osD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
2 Go to settings by moving the joystick.
3 Configure the options following the instructions that appear in
the bottom right corner.
4 To return to the upper menu or set other menu items, move
the joystick to ◄ or pressing ( / OK) it.
5 If you want to exit the OSD menu, move the joystick to ◄
until you exit.
Each option is described below.
Menu > settings Description
language Sets the menu screen to the desired language.
Power leD Turns the power LED on the front of the monitor on or off.
on
The power LED turns on automatically.
off The power LED turns off.
auto standby Feature that automatically turns off the monitor when there is no movement on the screen for a
period of time.
DisplayPort 1.2 Enables or disables DisplayPort 1.2.
y Be sure to configure this option according to the DisplayPort version supported by your
graphics card. Set this option to Disable if your graphics card does not support DisplayPort
1.2.
y In order to use 10 bit color in 3440 X 1440 @ 60 Hz, must be set to enable DisplayPort 1.2.
noTe
enable Enables DisplayPort 1.2
Disable Disables DisplayPort 1.2
osD lock Prevents incorrect key input.
on
Disables key input
off Enables key input
y All features are disabled except Brightness, Contrast, Volume, Input, OSD Lock in Settings
and the Exit button.
noTe
settings
easy control
language english >
Power leD on >
function
auto standby off >
DisplayPort 1.2 Disable >
PbP
osD lock off >
screen
settings
Reset
▲/▼: Move / ►: OK ◄: Back