LG NB4530B - Manual (Page 19)

3 Operating
Operating 19
Oper
ating
3
Basic operations
USB operation
1. Connect the USB device to the USB port.
2. Select the USB function by pressing FUNCTION.
3. Select a file you want to play by pressing
C or V.
To Do this
Stop Press Z.
Playback Press d/M.
Pause During playback, press d/M.
Skip to the next/
previous file
During playback, press C
or V to go to the next file
or to return to the beginning
of the current file.
Press C twice briefly to
step back to the previous file.
Search for a
section within a
file
Press and hold C/V
during playback and release it
at the point you want to listen
to.
Play repeatedly
or randomly
Press REPEAT on the remote
control repeatedly, the
display will be changed in the
following order, RPT 1 RPT
DIR (DIRECTORY) RPT ALL
RANDOM OFF.
Select a file
directly
Press 0 to 9 numerical buttons
on the remote control to go
to the desired file directly.
Resume
playback
The unit memorizes the point at
which you've changed function
or the unit had been turned off.
The resume point may be cleared when you
pull out the power cord or removing the USB
device from the unit.
,
Note
Other operations
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [DRC ON] by using
DRC.
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1. Press AV SYNC.
2. Use C/V to scroll up and down through
the delay amount, which you can set at
anything between 0 and 300 ms.
Turn off the sound temporarily
Press MUTE@ to mute your unit.
You can mute your unit, for example, to answer
the telephone, “MUTE” is displayed in the display
window.
To cancel it, press MUTE@ again on the remote
control or change the volume level.
Displaying file and input
source
You can display various information of the input
source by pressing INFO.
USB : MP3/WMA containing file information
OPTICAL/ARC/HDMI IN : Audio format, Audio
channel