LG NB4530B - Manual (Page 25)

Operating 25
Oper
ating
3
Controlling a TV with
the supplied remote
control
You can control your TV using the buttons below.
VOL +
VOL - AV/INPUT
PR/CH
PR/CH
Button Operation
MUTE@
Turn the TV’s volume on or
off.
AV/INPUT
Switch the TV’s input source
between the TV and other
input sources.
1 (TV POWER) Turn the TV on or off.
VOL +/–
Adjust the volume of the
TV.
PR/CH W/S
Scan up or down through
memorized channels.
y Depending on the TV being connected, you
may not be able to control your TV using
some of the buttons.
y The remote control of the unit performs
basic operation of your TV. Please use the
TV’s remote control to enjoy advanced
operation of your TV.
,
Note
Setting up the remote to
control your TV
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button, and
press the manufacturer code for your TV with
the numerical buttons (see the table below).
Manufacturer Code Number
LG 1(Default), 2
Zenith 1, 3, 4
GoldStar 1, 2
Samsung 6, 7
Sony 8, 9
Hitachi 4
2. Release the 1 (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.