LG DU-27FB34C - Manual (Page 41)

Installer’s menu items can be
accessed by using the optional
installer’s remote control. Just
press and hold MENU (about 8
seconds) until the menu disap-
pears, then press 9, 8, 7, 6,
then ENTER. To remove the
Installer’s Menu, press ENTER
repeatedly. Any changes you
make will be stored in non-
volatile memory.
The Installer’s menu opens with
the main menu. Use MENU and
SELECT to sequence through the
installer menus and submenus.
Use SELECT or TV/FM to scroll
up/down in the menus and sub-
menus. To change a setting use
the Left/Right ADJ keys. Press
ENTER to return to main menu.
Using the Installer’s Menu
Items 0-I - 103-I are accessible
only in the Installer’s Menu.
Their numbers, descriptions,
ranges, factory default settings,
and a place for listing any
changes made on site are given
below and on the following
pages.
The Factory Menu that is intend-
ed for qualified service techni-
cians only, is not shown. XX-F
Menu Items (not shown here)
are service type adjustments and
only qualified technicians hav-
ing specialized test equipment
should access them.
INSTALLERS
INSTALLERS1

INSTALLERS2
INSTALLERS3
INSTALLERS4
INSTALLERS5
INSTALLERS6
INSTALLERS7
INSTALLERS8
MICRO V3.00
D2A CARD - MICRO COMM
STATUS OK
Typical Installer Menu
Menu Function Value Default Brief Description of Function and Comments
Item Range Value
0-I. INSTALLER SEQ 0 - 3 0 Leave default set at 0.
1-I. POWER MANAGE 0 - 7 0 Sets number of hours of no activity before auto shutoff.
2-I. AC ON 0 / 1 0 Set to 1 to enable auto turn on at power up.
3-I. BAND-AFC 0 - 7 0 Sets Tuning band.
4-I. STRT CHANNEL 0 - 255 255 Channel at turn-on (255 for last Channel). For digital
channels, use with item 101-I Start Minor Channel.
5-I. CHAN LOCK 0 / 1 0 When set to 1, cannot tune from current channel.
6-I. GHOST CH 0 / 1 0 Set to 1 to enable Ghost Channel display.
7-I. START VOLUME 0-63, 255 255 Volume level at TV turn-on (Set 255 to retain last level).
8-I. MIN VOLUME 0 - 63 0 Minimum volume setting.
9-I. MAX VOLUME 0 - 63 63 Maximum volume setting.
10-I. MUTE DISABLE 0 / 1 0 Set to 1 to disable mute function.
11-I. KEY DEFEAT 0/ 1 1 Set to 1 to disable the front panel keyboard MENU key.
12-I. NOT USED
13-I. SCAN MODE 0 / 1 0 Puts TV On-Off event in Ch Up/Down sequence.
14-I. NOT USED
15-I. SLEEP TIMER 0 / 1 1 Set to 1 to enable Sleep Timer.
16-I. EN TIMER 0 / 1 1 Set to 1 to enable Timer.
17-I. ALARM 0 / 1 1 Set to 1 to enable Alarm.
18-I. NOT USED
19-I. NOT USED
20-I. FEATURE LEVEL 0 / 1 1 Zen 1 Leave default set 1 (1 Zen1).
21-I. V-CHIP 0 / 1 1 Set to 1 to enable V-Chip (Parental Control).
22-I. MAX BLK HRS 0 - 99 12 Sets number of Parental Control blocking hours.
23-I. CAPTION LOCK 0 / 1 0 Set to 1 to retain caption setting at turn off.
24-I. TEXT MODE 0 / 1 1 Set to 1 to add Text option to closed caption menu.
25-I. FUNCTION PRE. 0 - 3 0 Controls channel preview in Pay-Per-View function menu.
Installer Menu
Use the Installer Menu to set up or change operational settings.
See detailed descriptions of the Installer Menu items on the following pages
Page 41
D2A CARD V3.00